烤瓷鋁板公司

烤瓷鋁板產品特點 

一、耐污染性:烤瓷鋁板擁有陶瓷所具有的的拒水性和對種化學溶劑的耐腐蝕性。

二、優良的經濟性:能清潔，復原性好，節約了維護管理費,以氟碳涂裝為基本的有機涂料因白天炎熱的天氣而膨脹，造成涂膜的剝離、龜裂。在夜間氣溫下降時龜裂開始收縮，在收縮的過程中灰塵以及微小的污染物質趁機滲入其中附著在一起。這種污染物的附著使其復原的可能性極小，因而給建筑物的美觀及價值造成很大的影響。在零下5O℃和1700℃以上才發生反應的陶瓷涂料可防止這種溫度變化下的剝離、膨脹、收縮現象的產生，所以即使有污染附著物也可以輕松水洗復原，也就是每次下雨就可以產生清洗效果。

三、高耐氣候性:以無機溶劑及無機顏料組成的陶瓷板材的涂膜，因其所具有的的S i–О離子鍵的鍵能高于紫外線的能量，使得紫外線對陶瓷涂膜幾乎無影晌。其耐紫外線性能的優越性使得烤瓷鋁板在顏色、光澤的維持率上比一般涂料優越。

四、穩定的結構:就像巖石或陶瓷器經過長時間的風化也不會產生變化一樣，烤瓷鋁板的烤瓷涂層所具有的純無機樹脂及無機顏料形成的三維網狀結構擁有良好的穩定性?？梢栽谧贤饩€、酸雨、風、熱輻射等外部環境中延長建筑物的壽命。

五、環保性:與有機涂料在前期處理中使用化學洗滌劑相比，烤瓷鋁板前期采用噴砂技術，并且所使用的烤瓷涂料以水為分散劑，不會造成像無機涂料在噴涂中揮到空氣中而對空氣造成污染的現象。因此，與傳統的裝飾板相比，烤瓷鋁板是一種環保型的新型裝飾材料。

六、優良耐熱性︰建筑材料的不燃性(A級)烤瓷鋁板所使用的烤瓷涂料，由無機涂料和無機顏料構成，防火性能達到A1級，所以在火災中不會因燃燒產生有毒氣體。

1、Stain resistance: the porcelain aluminum panel has the water repellency possessed by the ceramic and the corosion resistance to thachemical solvent.

2、Excellent economy: It has some advantages of being cleaned, a good recovery, saving maintenance and management fees.The organic coating based on fluorocarbon coating is easy expand due to hot weather during the day resulting in peeling and cracking of the fim.When the temperature drops at night,the crack begins to shrink, the dust and tihy polltants are easy to infitrate into it and during the shrinking process

The achesion of such contaminants makes it extremely unlikely that they will be restored, thus having a significantimpact on the aesthetics and value of the building.Ceramic coatings that react at temperatures below minus 50 ' C and above i7o0 'c prevent the occurence of peeling,sweling, and shrinkage undr such temiperature changes, so that even if there is contaminated deposis it can be ealily washed and washed, that is, every time it rains it can produce a cleaning effect.

3、High weather resistance: The coating flrm of ceramic plate composed of inorganic solvent and inorganic pigment has almost no effect on the ceramic coating fim because the bond of Si- O ion bond which the member has is able to smash the energy of ultraviolet light.noon.The superiority of its UV resistance makes the porcelain aluminum plate superior to the general coating in color and gloss maintenance.

4、Stable structurer: Just like the rock or ceramics will not change after a long time of wethering, the three-dimensional network structure formed by the pure inorganicresin and inorganic pigment of the porcelain coating of the porcelain alurmirum plate hes its own characteristics.No structural stability. it can extend the life of buildings in external ernvironments such as ultraviolet light, acid rain, wind and heat radiation.

5、Environmental protecton:Comparing with the use of chemical detergents in the eary treatmient of organic coatings, the porcelain alumirum panels are sandblasted in the eariy stage, and the ceramic coatings used are water dispersing agents, which do not cause the like inorganio coatings to be sprayed.The phenomenon of polluting the air by waving into the air.Therefore, compered with the traditional decorative board,tha porcelain aluminum plate is a new environmentally friendly decorative material.

6、Excellnt heat resistance: non-combustility of building materials (Grade A)The porcelain coating used in porcelain alumium plate is composed of inorganic paint and inorganic pigment, and the fire performance reaches A1 grade,so itwill not be produced by fire in the fire.Toxi

應用范圍

烤瓷鋁板由于具有超耐氣候性及色彩艷麗的特性,被廣泛用于建筑外裝。又由于其阻燃、耐腐蝕、耐氣蝕、耐污染、非粘貼、衛生、阻隔家電產品電磁波等的諸多優點,常用于廚房設備、用具和廚房裝飾板及供暖裝置裝飾板的制造,同時還可用于各種管道、公路設施(護欄、信號燈、標志牌等)、工業設備、海港碼頭設施、大眾交通工具內飾(公共汽車、地鐵、飛機、船舶等)的裝飾板材。

Porcelain aluminum panels are widely used in building exteriors due to their high weather resistance and colorful characteristics.Moreover, due to its many advantages such as flame retardant, corrosion resistance, cavitation resistance, pollution resistance,non-sticking, hygiene, and electromagnetic waves that block home appliances, it is often used in the manufacture of kitchen equipment, appliances, kitchen trim panels and heating fixtures. It can be used for decorative panels of various pipelines,highway facilities (guard rails, signal lights, signs, etc.), industrial equipment, harbor terminal facilities, and public transport interiors (buses, subways, airplanes, ships, etc.).